web analytics

High capacity
Detomet2.0 and Explomet2

Detomet2.0 and Explomet2 20 to 30 channels

Detomet2.0      20 to 30 detonators

Depending on your choice, capacity of 20, 24 or 30 channels.

Specially design to measure delay time of non-electric detonators.

The Detomet2.0 return the delay of 1 to 30 detonators.

High accuracy of ±0.01 μs, with a time base insensible to temperature. No calibration needed.

Choice of results printed on paper.

All results saved on SD card.

Easy graphic display of preliminary results configurable.

Integrated in a heavy-duty transport case with a stainless steel control panel.

The case can remain close during measurement.

Very long life battery with integrated charger (110 to 240V).

Digital battery level indicator.

USB adapter for charging additional devices (smarphone…).

Explomet2      20 to 30 counters

Depending on your choice, 20, 24 or 30 capacity.

Specially design to measure time interval between 2 points.

The Explomet2 return the delay between 2 to 31 fibers.

High accuracy of ±0.01 μs, with a time base insensible to temperature. No calibration needed.

Choice of results printed on paper.

All results saved on SD card.

Integrated in a heavy-duty transport case with a stainless steel control panel.

The case can remain close during measurement.

Very long life battery with integrated charger (110 to 240V).

Digital battery level indicator.

USB adapter for charging additional devices (smarphone…).
Explomet2 High capacity

Use & Operation

Based on the same fiber optic technology as the Explomet2series and the Detomet2.0 these products are an extension for measuring simultaneously a large amount of samples.

Easy to use.

Large touchscreen 7.0 inch.

The device is avaible for right-handed or left-handed users, to be specified when ordering.

Connection of the fibers under the cover is easy due to the angle of the connectors.

A led lamp is included just in case of darkness.

Performances of these 2 products are the same as the Explomet2T+ and the Detomet2.0

We add a long life battery with an integrated 110-240 Volts charger.

A printer selectable via a switch can print the results.

A voltmeter display the charge of the battery (triggered by a switch).

A dual usb adapter is available for charging external devices (smartphone, tablet…)